Installation And Operation Spaces; Support Base - Wega ALE Use And Maintenance Manual

5.4 Installation and operation spaces

Before the machine arrives, a suitable environment must be
prepared:
• The appliance is not suitable for installation in an area
where a water jet may be used.
• The machine is not suitable for outdoor use.
• The machine must not be used inside kitchens.
• The room must be suited for the intended use with ade-
quate space to comfortably use the machine.
• The lighting must be adequate and conform with current
standards.
• The earthing system must comply with current standards.
• The electrical system must comply with current regula-
tions.
TECHNICIANS' manual

5.5 Support base

To ensure a sufficient degree of ergonomics and machine
safety, a support base with the following features must be
made available (reference drawings on the next page):
• Ensure that there is sufficient space for the machine to be
positioned and used correctly.
• The worktop (1) must be comfortable and able to with-
stand the machine's weight. The height of the upper sec-
tion of the machine (19) must be at least 150 cm from
the floor.
• The base must be perfectly level and have no irregularities.
• The terminals for connecting to the water mains (15) and
electrical mains (9) must be in the immediate vicinity of
the support base.
• The machine can also be positioned against a wall, but
please leave enough space - at least 50 cm (3) - on the
right and left for easy access during cleaning operations.
• Fit a drawer under the worktop (17) which will be used to
deposit used coffee grounds and if possible, also fit a rub-
ber support (18) to knock the filter holder against.
FOR THE USA: Replace the machine's feet (8)
with the raised ones supplied.
The new feet must be firmly fastened to the
machine by means of the specific nut.
In order to work properly and ensure safety, the
machine must rest on a perfectly horizontal sur-
face.
Any machine alignment adjustments must be carried out
by adjusting the feet (8).
23 100
of