Playcraft 1249-DDH Installation Instructions

GEO-WAVE CLIMBER HORIZONTAL
INSTALLATION INSTRUCTIONS

IMPORTANT NOTES: Read First

(A) Use liquid thread lock (such as Loctite
curing helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Do not pour concrete until the equipment is completely assembled, leveled and plumbed. Concrete must be
allowed to cure completely before using the equipment (at least 72 hours).
(C) Refer to Installation Manual for 1309 Half Wall assembly instructions.
(D) Use appropriate compliant protective surfacing and adjust footing depths accordingly. See free publication -
The Handbook for Public Playground Safety, Publication #325 at www.CPSC.gov for the surfacing appropriate
for the fall height of the equipment or consult your surfacing supply representative.
See Installation Manual
Section 1309 Half Wall
See Footing Detail
®
) with all threaded hardware. Important: Liquid thread lock (prior to
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
Geo-Wave Climber Horizontal
Deck to Ground Mount
Figures 1.2 & 1.4
Figures 1.1 and 1.3
NOTE: R5 4' deck height ground mount shown.
Other configurations will vary slightly but does
not affect assembly.
1249-DDH/DGH
Page 1 of 5
FIGURE 1
Rev D
10/7/2020