Digidriverip - ProLights DIGIDRIVERIP User Manual

DIGIDRIVERIP - DIGISTRIPIP50 - DIGISTRIPIP100
3
- 1 - INTRODUCTION

1.1 DIGIDRIVERIP

DIGIDRIVERIP is a driver which provides power and processing to the DIGISTRIPIP. It has 2 outputs and can
control up to 20 DIGISTRIPIP100s and 40 DIGISTRIPIP50s - each offering the control of up to 3.600 pixels in
a one rack unit, offering 20 DMX universes and 546 W of power in and out. DIGIDRIVERIP cannot control
DIGISTRIP, DIGITUBE and DIGITILE. DIGIDRIVERIP is compatible with Art-Net, Kling-Net and sACN protocols
and runs signal and power over a 4 pole XLR cable that allow wiring of units in a chain. The user interface
consists of a black OLED display for settings, protocol selection, network address and test patterns. IP 65
rating allows for the usage at outdoor events so humidity and rain are no longer a worry
BODY
• Hardware on-board: Included rack-mount hardware
• Body: sturdy die-cast aluminium body conceived for long-time durability
• Body colour: black
• Other: 2U rack
CONTROL
• Control units: 20 x DIGISTRIPIP100 or 40 x DIGISTRIPIP50
• Art-Net channels: 20x512ch
• Protocols: Art-Net, Kling-Net, sACN
• Pixel control: pixel2pixel control
• Display: black OLED high resolution display
ELECTRONICS
• Operating temperature: -20° ~ +45°
ELECTRICAL
• Power supply: 100-240 V – 50/60 Hz
• Power consumption (at 230 V): 546W
• Power consumption (at 120 V): 570W
• Output (at 230 V): 5 units on a single power line
• Output (at 120 V): 2 units on a single power line
PHYSICAL
• Cooling: natural cooling of the peculiar chassis and to absence of fans
• Sospension and fixing: any position with quick-lock omega brackets
• Signal connection: 2xRJ45 and 4p out
• Power connection: Seetronic powerCON waterproof IN/OUT connectors
• IP rating: 65 for outdoor installations
• Dimensions (WxHxD): 483x84x250 mm
• Weight: 4.5 kg
483 263
Technical drawing Fig.1