Environmental Water Systems EWS-SPECTRUM Product And Installation Manual page 2

If you don't read this service guide at least read these 7 simple steps
SIMPLe STePS FOR A CORReCT INSTALLATION AND A HAPPY CUSTOMeR
1.
set up system and install it on the main water supply coming into
the home
Page 7-9
2.
Use corrugated flexible stainless or some other flexible piping to
make the plumbing connections
Page 10
3.
Install a proper drain line with an air gap
Page 11
4.
Plug in the transformer into the back of the valve and into a
standard outlet and set the time of day
Page 12-13
5.
Open inlet on the bypass slowly to fill the tank and begin the start
up procedure (see complete start up procedure)
Page 13-14
6.
Allow system to start itself up and self clean the filtration media
Page 15
7.
Open outlet on the bypass and put system in service position
and flush water throughout the house, run tubs, flush toilets,
replace ice and drain water heater if needed.
Page 16
please see the great information available in this service manual
3.
4.
Create Happy Customers
Avoid Problems and Callbacks
2.
5.
6.
6.
7.
2
outlet
closed
inlet
outlet
closed
inlet
outlet
inlet