Summary of Contents for Environmental Water Systems BB 1" SETUP
Page 1
5 MICRON PRe-SeDIMeNT fILTRATION Model Number: BB 1” SETUP, BB 11/2” SETUP ALL FILTRATION PRODUCT PROUDLY MADE & ASSEMBLED IN THE USA EWS, Inc./Environmental Water Systems office. 702.256.8182 Monday - Friday, 8:30 am - 4:30 pm Pacific Standard Time fax. 702.256.3744 www.ewswater.com...
Page 2
Point of Entry, Pre-Sediment Filtration Unit Model: BB 1” SeTUP application for 3/4” to 1” lines BB 11/2” SeTUP application for 11/4” to 11/2” lines Pre-Sediment Filter for most general purposes. 20” Big Blue Housing for use on 3/4” to 1” or 11/4” to 11/2” lines. Includes superior 5-micron, 20” pure polypropylene filter for full bed depth. These units are designed to provide the needed pre-filtration of heavier sediment and/or particulate (dirt, rust (not iron), sand, silt) water prior to a carbon based unit, or pH unit, or after an iron removal unit.
SET-UP, INSTALLATION OF UNIT & BYPASS AND START-UP: Unpack the unit. Unit comes completely assembled with the following: Pre-Sediment filter, housing with mounting bracket and spanner wrench Identify an appropriate mounting location adjacent to the water line intended for installation. Unit can be mounted in indoor or outdoor locations.
Page 4
The EWS, Inc./Environmental Water System Product available through: Authorized Kitchen & Bath Showrooms, Appliance Showrooms, Building & Plumbing Wholesale Supply Locations and their building, plumbing, HVAC and service contractors, and Authorized Online Distributors. Contact Information: EWS, INC. Environmental Water Systems ewswater.com 702.256.8182 (M-F 8:30am-4:30pm PST) customerservice@ewswater.com 702.256.3744...
Need help?
Do you have a question about the BB 1" SETUP and is the answer not in the manual?
Questions and answers