4.7. Specific of Operation in TRANSMISSION Mode
Under no circumstances should operation with antenna output SWR above 10:1 be
allowed!
In many cases, the tuner may be able to handle SWR even higher than 3:1 at the antenna output, but if the
protection for antenna overcurrent, overvoltage, forward or reflected power is activated, the operator
should reduce power input to the tuner (e.g., transceiver excitation).
4.8. Power Reduction at Overload
When matching of loads with SWR above 3:1 (up to 10:1) is possible, the maximum allowed tuner power
must be reduced gradually as per
Page 40 of 72 | S e c t i o n STARTING UP AND MAIN FUNCTIONS
User's Manual | ACOM 04AT | Remote Automatic Antenna Tuner and Switch
NOTICE
Table 8-1 Maximum input power of the tuner as function of the antenna SWR
.
May 2021