Figure 2-9 Accessories; Table 2-1 Accessories List - Acom Owner's Manual

For remote/outdoor tuner operation, the grounding terminal of the tuner marked
GROUND, and the antenna feeders should be connected as described in Section
Lightning protection when the tuner is installed outdoor
After completing the tuner installation, attaching, and connecting the cables, check the
reliability of all fixtures and fasten again, if necessary. Apply mineral jelly or another
suitable lubricant to the connectors, grounding terminal, and assembling nuts and screws
to prevent jamming/clinching or damage to the threads in a future disassembly.
Nr.
1 Mast bracket
2 Desk bracket
3 Cable clamps
4 Desk bracket bolt
5 Desk bracket bolt threaded pad
6 Hose clamp - small
7 Desk bracket spacer plate
8 Wall bracket
9 Hose clamp - large
10 Washer (DIN6798-A4.3-A2) - mounting Pos. 1, 8 and 3 (together with 13)
11 Bolt (DIN7985-M4x10-A2) - mounting Pos. 1, 8 and 3 (together with 13)
12 Flat-head bolt (DIN965-M4x12-A2)
13 Washer (DIN9021-M4-A2) - mounting Pos. 3 (together with 10 and 11)
Page 28 of 72 | S e c t i o n INSTALLATION
User's Manual | ACOM 04AT | Remote Automatic Antenna Tuner and Switch
DANGER
.
DANGER

Table 2-1 Accessories list

ACCESSORIES LIST
Table 2-1 Accessories list

Figure 2-9 Accessories

Figure 2-9 Accessories
1.5.2
Pcs.
1
1
5
1
1
3
1
1
3
10
10
4
5
May 2021