Installation And Connection For Indoor Operation; Figure 2-2 Desk Installation Bracket - Acom Owner's Manual

User's Manual | ACOM 04AT | Remote Automatic Antenna Tuner and Switch

2.3. Installation and Connection for Indoor Operation

For installation and connection for remote/outdoor operation see Section
and Connection for Outdoor Operation
If the desk mounting option is chosen, the tuner is placed on the desk with the connectors facing to the back,
rubber feet facing down and secured in place with the provided desk bracket (see
). The decorative black anodized aluminum faceplate provides an aesthetic look, matching any
bracket
high-end ham radio setup.
Please, see

Figure 2-2 Desk installation bracket

The desk bracket (Pos. 2) is secured to the tuner body (Pos. 1) via 4 flat-head bolts (Pos. 3).
Be sure to place the provided metal spacer plate (Pos. 4) between the bracket and the tuner body. The bracket
is finished off with black polymer paint, reducing the possibility of accidental scratching of the desk surface.
After mounting and securing the tuner to the desk, the only contact surfaces are the rubber feet and rubber
protector of the bracket bolt, ensuring scratch-free desk surface.
May 2021
.
Figure 2-2 Desk installation bracket
Figure 2-2 Desk installation bracket
).
2.4 Installation
Figure 2-2 Desk installation
4
2
S e c t i o n INSTALLATION | Page 21 of 72