Table of Contents
Advertisement
3.2.4. АNT Button (Change of Antennas)
Antenna outputs are switched automatically, along with the change of frequency band to the values assigned
to bands by the operator in the table of the ANTENNA ASSIGNMENTS menu (see Section
).
ASSIGNMENT Menu
The ANT button is only available if two or more antennas for the selected band are assigned in the table.
E.g., if Antenna 2 and Antenna 4 have been assigned, the ANT button will switch between them in a
"A2-A4-A2-A4..." loop at each button press, and the unassigned numbers (A1 and A3 in the case) will be
skipped. At each antenna change, the frequency segment indication and tuning setting is refreshed as well
(see Section
3.2.1 Tuner Information Area on the Amplifier Screen
3.2.5. Tuner Related Menus
When a tuner is assigned (see Section
MENU SELECTION makes available four additional tuner related menus:
- ANTENNA ASSIGNMENTS
- ATU MEASURE
- ATU SERVICE
- ATU TUNING SETTINGS LOOK UP/ERASE.
Each of these four menus will be reviewed in detail in Section
Page 34 of 72 | S e c t i o n GETTING STARTED
User's Manual | ACOM 04AT | Remote Automatic Antenna Tuner and Switch
4.2 Tuner Assignment and Unassignment
).
), the main menu of the amplifier
6 ADVANCED FUNCTIONS AND OPTIONS
6.1 ANTENNA
.
May 2021
Advertisement
Table of Contents
