User's Manual | ACOM 04AT | Remote Automatic Antenna Tuner and Switch
8.1.12. Operating Environment
Protection class: IP 53 (NEMA Type 3);
•
Temperature range: -40 to +65 degrees Celsius (-40
•
Relative air humidity: Up to 98% @ +40 degrees Celsius (104
•
Height: up to 3050 m (10000 ft) above sea level without output deterioration.
•
8.2. Functions
8.2.1. Process of Matching of Antenna Impedance
Fully automated.
•
8.2.2. Modes of Tuning
Two modes: Full (basic cycle of user tuning) and Quick (restoring preset full tune settings from the non-
volatile memory).
8.2.3. Memory for the User Tune Settings
Integrated non-volatile memory, separate for all four antenna-selectivity types and outputs.
8.2.4. Types of Antenna Selectivity / Bandwidth
For fitting the width of frequency segments to the natural bandwidth of antennas, four antenna selectivity
types can be declared:
Sharp (narrow bandwidth): the width of frequency segments is approximately 0.25% of the
•
central frequency of the band;
Regular - used by default. The width of frequency segments is approximately 1% of the central
•
frequency of the band;
Wide (wide/broad-band). The width of frequency segments is approximately 4% of the central
•
frequency of the band;
Fixed - for the tuning to be valid, it requires coincidence of the operating frequency with
•
tolerance +/-4 kHz to the stored value.
8.2.5. Bypass and Use ATU Modes
In BYPASS mode all components of the matching network are excluded, allowing direct operation of
broadband antennas. The normal mode is USE ATU.
May 2021
o
o
F to 150
F);
o
F);
S e c t i o n SPECIFICATIONS | Page 63 of 72