If The Mast Mounting Option Is Chosen; Figure 2-7 Mast Installation Bracket - Acom Owner's Manual

2.4.2. If the mast mounting option is chosen

Please, see

Figure 2-7 Mast installation bracket

The weather protective cover (Pos. 1) is removed by unscrewing the five bolts (Pos. 2). The five cover holding
brackets (Pos. 6) are left in place, attached to the tuner body. Using the provided in the mounting kit four
flat-head bolts (Pos. 4), the mast bracket (Pos. 3) is secured to the tuner body and then the weather
protective cover (Pos. 1) is secured back in place with the five bolts (Pos. 2).
Thread the three hose clamps (Pos. 5), provided with the mounting kit, through their respective rectangle
opening pairs in the mast bracket (Pos. 3).
2
The whole assembly (see
the connectors facing down using three hose clamps (Pos. 3). Always secure any loose cables, guy wires or
any other object that might fall on or hit the tuner assembly.
Both mast and wall brackets have mounting holes for securing cables with the provided cable clamps (Pos. 3
in the
Table 2-1 Accessories list
washers (Pos. 10 and 13).
Page 26 of 72 | S e c t i o n INSTALLATION
User's Manual | ACOM 04AT | Remote Automatic Antenna Tuner and Switch
and
Figure 2-7 Mast installation bracket
6
Figure 2-7 Mast installation bracket
Figure 2-8 Securing the tuner to a mast
). The cable clamps are mounted with bolts (Pos. 11) and a combination of 2
Figure 2-8 Securing the tuner to a mast
, Pos. 1 & 2) is then secured to the mast with
.
1
3
4
5
May 2021