Sharp AR-C260P Operation Manual page 8

5 If you need to adjust the black and white
image quality (print contrast), perform the
following step. If you do not need to adjust
the image quality, go directly to step 6.
To adjust the black and white image quality (print
contrast), click the [Color Adjustment] button. The
following screen will appear. Adjust the brightness
and contrast in the [Image] field at left.
When finished, go to step 6.
6 Click the [Paper] tab.
Make sure that the paper size is correct. Next,
configure the "Paper Selection" settings. "Auto
Select" is normally used for both "Paper Source"
and "Paper Type". When you have completed the
settings, click the [OK] button to close the printer
properties window.
NOTE
Using the bypass tray
When the paper source is set to the bypass tray, be
sure to set the paper size and paper type on the
machine's operation panel. This procedure is
explained on pages 2-14 to 2-16 of the OPERATION
MANUAL (for general information).
7 Click the [OK] button in the Print window
in Windows 95/98/Me/NT 4.0, or the [Print]
button in Windows 2000/XP.
Downloaded from: http://www.usersmanualguide.com/
(page 2-14)
PRINTER DRIVER SETTINGS
1-5