Sharp AR-C260P Operation Manual page 19

[Punch]
Configure the settings for the Punch function.
When this is selected, the document will be hole-
punched. The Collate setting is automatically
activated when Punch is selected.
Default setting: Not selected
■ ■ ■ ■ Hole punching (only if a punch module is
installed)
If the saddle stitch finisher is equipped with a hole
punch module, printed paper can be hole
punched and delivered to the offset tray. Saddle
stitching and hole punching cannot be selected at
the same time. The automatic image rotation will
not function when the hole punching function is
used.
For the allowed paper sizes for punching, see the
specifications on page 5-3 fo the OPERATION
MANUAL (for general information).
<Example>
{Original 1}
{Original 2}
Downloaded from: http://www.usersmanualguide.com/
SELECTING PRINTING FUNCTIONS Frequently used settings (continued)
{Punch positions}
{Punch positions}
[No Offset]
Select this setting when you do not wish sets of
collated or grouped output to be offset from each
other.
Default setting: Not selected
■ ■ ■ ■ Offset mode
When delivered to the tray, each set or group of
pages will be offset from the previous set for easy
separation.
(The offset function only operates in the offset
tray.)
Stapled sets will not be offset.
Offset mode Non-offset mode
2-5