Notice Page Printing - Sharp AR-C260P Operation Manual

NOTICE PAGE PRINTING

A notice page will be printed when the current print job cannot be run due to a system limitation and an explanation
of the limitation is too lengthy to be shown in the message display. The notice page will describe the limitation and
possible ways to complete the job.
A notice page will be printed in the following cases.
●When the print data of a single job is so large that it cannot be held in memory. (When there are other jobs
occupying memory, notice pages may tend to be printed more frequently even for jobs with small amounts of
data.)
●When a print job is sent to the printer and the number of print hold jobs has reached the maximum of 100 jobs.
●When different paper sizes have been selected for printing within a print job and one or more of the sizes cannot
be delivered to the selected exit tray or to the stapler compiler. In these cases printed paper will be delivered
partly to the specified destination (tray or compiler) and partly to another exit tray.
●When a function is selected that has been disabled using the key operator programs, such as disabling of two-
sided printing, disabling of the staple function, or disabling of a specified exit tray.
●An invalid account number is entered when the auditing mode has been set.
■ ■ ■ ■ Disabling of notice page printing
You can use the "DISABLE NOTICE PAGE PRINTING" of the key operator program to disable notice page printing.
(see page 20 of the Key Operator's Guide in the "PRINTER UTILITIES" CD-ROM)
4-6
Downloaded from: http://www.usersmanualguide.com/