Sharp AR-C260P Operation Manual page 21

Account Number
When "AUDITING MODE" in the key operator
programs is enabled, a count can be kept of the
number of sheets printed by each account.
Account
programmed as explained in the Key Operator's
Guide in the "PRINTER UTILITIES" CD-ROM.
When the "ACCOUNT LIMIT" key operator
program is enabled, printing is not permitted after
the page count reaches the limit. When this
happens, a notice page is printed (unless the
"Disable notice page printing" key operator
program has been enabled).
When the "NO PRINT IF ACC'T # INVALID" key
operator program is enabled, printing will not take
place if an invalid account number is entered, or if
printing is executed without entering an account
number. If you want printing be allowed even if a
valid account number is not entered, disable this
setting. In this case, pages printed by an invalid
account number
"OTHERS" count.
Default Job ID
Use this setting to select the default user name
and job name that appear in the machine's
operation panel. Note that if "Always Use This ID"
is not selected, the Windows login name and the
job name set in the application will be
automatically used.
The names that appear here will also appear in
the dialog box that appears when printing is
executed.
Downloaded from: http://www.usersmanualguide.com/
SELECTING PRINTING FUNCTIONS Frequently used settings (continued)
numbers for this purpose
will be included
[User Name]
Use this setting to select the default "User Name"
that appears in the machine's operation panel. If
"Always Use This ID" is selected, the name
are entered here will appear in the machine's
operation panel. If "Always Use This ID" is not
selected, the Windows login name will be
automatically used.
Up to 16 characters can be entered.
Default setting: Username unknown
[Job Name]
Use this setting to select the default "Job Name"
that appears in the machine's operation panel. If
"Always Use This ID" is selected, the name
entered here will appear in the machine's
operation panel. If "Always Use This ID" is not
selected, the job name set in the application will
be automatically used.
Up to 18 characters can be entered.
Default setting: Jobname unknown
in the
[Always Use This ID]
This allows you to select whether to automatically
obtain the "User Name" and "Job Name"
displayed in the machine's operation panel, or
whether to use the names entered in this dialog
box.
Not selected ....... The Windows login name will
Selected ............. The names entered in this
Default setting: Not selected
be automatically used for the
"User Name", and the job
name set in the application will
be automatically used for the
"Job Name".
dialog box will appear in the
machine's operation panel.
2-7