Sharp AR-C260P Operation Manual page 12

5 If you need to adjust the colour image
quality, perform the following step. If you
do not need to adjust the image quality, go
directly to step 6.
To adjust the colour image quality, click the [Color
Adjustment] button. The following screen will
appear. Use the [Color Balance] field to adjust the
saturation of colour images and strengthen or
weaken the RGB (red, green, and blue) colour
components.
Use the [Image] field to adjust the brightness and
contrast of colour images.
When finished, go to step 6.
6 Click the [Paper] tab.
Make sure that the paper size is correct. Next,
configure the "Paper Selection" settings. "Auto
Select" is normally used for both "Paper Source"
and "Paper Type". When you have completed the
settings, click the [OK] button to close the printer
properties window.
NOTE
Using the bypass tray
When the paper source is set to the bypass tray, be
sure to set the paper size and paper type on the
machine's operation panel. This procedure is
explained on pages 2-14 to 2-16 of the OPERATION
MANUAL (for general information).
Downloaded from: http://www.usersmanualguide.com/
(page 2-14)
PRINTER DRIVER SETTINGS
7 Click the [OK] button in the Print window
in Windows 95/98/Me/NT 4.0, or the [Print]
button in Windows 2000/XP.
1-9