Sharp AR-C260P Operation Manual page 10

5 If you need to adjust the colour image
quality and/or the black and white image
quality (print
following step. If you do not need to adjust
the image quality, go directly to step 6.
To adjust the colour image quality and/or black
and white image quality (print contrast), click the
[Color Adjustment] button. The following screen
will appear. Use the [Color Balance] field to adjust
the saturation of colour images and strengthen or
weaken the RGB (red, green, and blue) colour
components.
Use the [Image] field to adjust the brightness and
contrast of both colour and black and white
images. (page
When finished, go to step 6.
6 Click the [Paper] tab.
Make sure that the paper size is correct. Next,
configure the "Paper Selection" settings. "Auto
Select" is normally used for both "Paper Source"
and "Paper Type". When you have completed the
settings, click the [OK] button to close the printer
properties window.
NOTE
Using the bypass tray
When the paper source is set to the bypass tray, be
sure to set the paper size and paper type on the
machine's operation panel. This procedure is
explained on pages 2-14 to 2-16 of the OPERATION
MANUAL (for general information).
Downloaded from: http://www.usersmanualguide.com/
contrast), perform
2-14)
7 Click the [OK] button in the Print window
in Windows 95/98/Me/NT 4.0, or the [Print]
the button in Windows 2000/XP.
PRINTER DRIVER SETTINGS
1-7