Selecting Printing Functions; Frequently Used Settings - Sharp AR-C260P Operation Manual

SELECTING PRINTING FUNCTIONS

Almost all printer settings are configured in the printer driver properties window that appears when you print from an
application or when you select [Properties] from the printer driver icon menu. Click a tab in the properties window to
adjust the settings on that tab.
The following explains how to adjust settings when the properties window is opened from an application.
The printer driver window shown in the following explanation has the following options installed:
Duplex module/2 x 500 sheet paper drawer + duplex bypass/inverter unit + saddle stitch finisher + punch module

Frequently used settings

The following screen appears when the Main tab is clicked. The settings and buttons in the screen are explained
below.
Copies
Set the number of copies.
Any number from 1 to 999 can be set.
Default setting: 1
Colour mode display
This displays the selected colour mode for
printing. Three colour modes are available:
"Automatic", "Color", and "Gray Scale" (see
page 2-13).
Collate
Select this checkbox to collate the copies.
When the staple function or punch function is
turned on, a checkmark automatically appears in
the checkbox.
Default setting: Selected
Document Style
Select one-sided or two-sided printing.
[1-Sided]...................Print on one side of the
[2-Sided (Book)] .......Print on both sides of the
[2-Sided (Tablet)] .....Print on both sides of the
[Pamphlet Style]
Default setting: 1-Sided
*1 The following two formats can be selected for
middle binding.
2-2
Downloaded from: http://www.usersmanualguide.com/
paper.
paper and bind at the side.
paper and bind at the top.
*1 .....Print on both sides of the
paper and bind down the
middle.
[Tiled Pamphlet]
Print on paper double the size of the document
size selected in the application.
The page order will be rearranged as required for
the middle binding format.
[2-Up Pamphlet]
The document size selected in the application will
be reduced in the same way as in 2-Up printing,
on
and printing will take place using the selected
paper size.
The page order will be rearranged as required for
the middle binding format.