Device Detecting Configuration - Aaeon NanoCOM-WHU User Manual

3.4.9.1

Device Detecting Configuration

Options Summary
Action
Select action that robot should do.
Soft or hard reset
Select reset type robot should send on each boot.
Retry-Count
Fill retry counter here. Robot will reset system at most counter times, and then let the
system continues its POST.
At time
Select robot action time:
After show logo: Robot will do action after logo is displayed. System devices are almost
ready.
Before show logo: Robot will do action earlier before logo, but some devices may not
be ready.
Chapter 3 – AMI BIOS Setup
Reset System
Hold System
Soft
Hard
3
After show logo
Before show logo
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
33