Advertisement
ECA-4025 User Manual
Fiber LAN LED – SFP, SFP+, SFP28, QSFP+, QSFP28
Fiber LED: RX or TX cable status (By Project)
On board LED:
Status
SFP 1G (Amber)
Link
ON (Amber)
Active
Blinking / Data access
Non-Link
OFF
1. When cable is plug-in and network is linked. Both LED will be bright. The behavior is as defined.
2. Without the Cable plug-in, the LED should be off.
3. If LAN Driver controls the LED, the behavior will follow the driver.
(1Gb) SFP Light pipe LED (top location)
Speed
Amber
(Active)
1G
Blinking / Data access
Non-Link
OFF
1. When cable is plug-in and network is linked. Both LED will be bright. The behavior is as defined.
2. Without the Cable plug-in, the LED should be off.
3. If LAN Driver controls the LED, the behavior will follow the driver.
SFP+ 10G (Green)
ON (Green)
Blinking / Data access
OFF
Amber
/
Green
(Link)
ON (Amber)
OFF
94
Advertisement
