Advertisement
ECA-4025 User Manual
This system is built with four (4) 2.5" HDD/SSD slot drive bay. Please follow the instructions to install the disk
drives.
1. Power off the system and open the chassis
cover.
2. Locate the 2.5" drive bay. The drive tray
should be secured to the motherboard.
3. Loosen the two (2) screws that fixes the
drive tray. Gently pull out the disk tray.
4. Slide a 2.5" HDD/SSD into the drive tray.
Push in until the SATA Connector is firmly
seated.
5. Secure the disk with two (2) screws on each
side (four screws total).
6. Repeat steps above for each additional
drive.
31
Latches x2
SATA
Connectors
SATA power
SATA cable
cable connector
connector
Advertisement
