Qpm Dc Electric Tools; Tool Specifications - Stanley EB35PB User Manual

QPM DC Electric Tools

This manual promotes proper and safe use and gives guidance to owners, employers,
supervisors and others responsible for training and safe use by operators. DC electric tools
from STANLEY ASSEMBLY TECHNOLOGIES are intended for use in industrial threaded
fastening or precision position and or adjustment applications only. Some instructions may
not apply to all tools. Please contact your Stanley Sales Engineer for information or
assistance on Stanley training for assembly tool operation.
1.1

Tool Specifications

Operating Conditions Temperature
Humidity
Noise Level: A-weighted emission sound pressure level at the work station < 70dBA (ref
20μPa) as determined according to ISO 15744-2002.
Vibration Level: Weighted root mean square acceleration value at the handle < 2.5 m/s
determined according to ISO 8662.
STANLEY ASSEMBLY TECHNOLOGIES hereby declares the following sound and vibration
emission levels as required by the Machinery Directive 98/37/EC.
Product A-weighted emission sound
pressure level at the work station
L (ref 20µPa).
pA
Value determined according to
ISO 15744-2002 * using as basic
standards ISO 3744 and ISO 11203
E Series, EA
Series, EB Series, < 70dBA
and EC Series
electric tools
* Operating conditions for all measurements: full rated speed, no load, rated supply
voltage or pressure.
A-weighted emission sound power level L
emission levels are below 85dBA.
C-weighted peak emission sound pressure level L
Uncertainty K , K , K : not relevant, declared levels are maximum values.
pA WA pCpeak
QPM DC Electric Tools
32 to 122 ºF (0 to +50 ºC)
0 to 95 % non-condensing
Weighted emission root
mean square acceleration
level at the handle. Value
determined according to
ISO 8662 * (single axis)
< 2.5 m/s²
: not required, declared sound pressure
WA
: not applicable to these products.
pCpeak
2
as
3