Tightening Cycle Counters - Stanley EB35PB User Manual

1.4.4

Tightening Cycle Counters

QPM tools have onboard counters that record the number of tightening cycles
completed by the tool.
•
Odometer Counter. Records the total number of tightening cycle
completed.
•
Trip Counter. Records the number of tightening cycles completed since the
last reset.
•
PM Counter. Records the number of tightening cycles completed since the
last reset.
•
PM Threshold. A static value set by the end user. When the PM Counter
exceeds the PM Threshold (Limit), the controller provides a maintenance
alert. The alert is an orange LED on the front panel and the tool.
The controller reads the tightening cycle counters from the tool on each power
up. Each counter increments after the tool is ran and reaches the target value.
QPM DC Electric Tools
11