Racelogic Performance Box Touch Accel Mode Quick Start Manual page 6

Setup
1. Performance Box Touch has an internal patch antenna, meaning that in many circumstances, where the unit has a
clear view of the sky without any interference, an additional antenna is not required.
However, if required, mount the external GPS antenna (RLACS284) in the centre of the roof of the vehicle, away
from roof bars and other antennas. For more information on antenna mounting positions
2. If applicable, connect the external GPS antenna to the Performance Box Touch.
3. Connect the Battery (RLACS290) if required. For more information on the battery
4. Connect the Swivel Neck Richter Suction Mount (RLACS277) to the rear of the unit or battery and attach to the
vehicle windscreen. For more information on mounting
5. Connect the power via the
the Power button on the battery for a few seconds.
6. Insert the SD card into the
as long as the card has free space.
Power socket, or if using the battery independent of a power source, press and hold
Side of the Unit. The SD Card Icon
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/
click here.
should display as green
Performance_Box_Touch_Accel_Mode_-_Quick_Start_Guide
click here.
click here.
6