Safety Regulations; Safety Assessment; Additional Documents That Apply; Use Of Qualified Personnel - Pilz PSEN ml b 1.1 Operating Manual

Safety
Foreseeable misuse
} Safety switches and actuators of the safety gate system must not be used as mechanical
limit stops
} Use of the under corrosive environmental conditions (cooling emulsions, surface treat-
ment, gases, ...)
} Use in environments with high dust pollution
2.2

Safety regulations

2.2.1

Safety assessment

Before using a device, a safety assessment in accordance with the Machinery Directive is
required.
The product as an individual component fulfils the functional safety requirements in accord-
ance with EN ISO 13849 and EN 62061. However, this does not guarantee the functional
safety of the overall plant/machine. To achieve the relevant safety level of the overall plant/
machine's required safety functions, each safety function needs to be considered separ-
ately.
2.2.2

Additional documents that apply

Please read and take note of the following documents.
Only for use of the Safety Device Diagnostics (SDD)
}
Operating manual for the fieldbus module, for example SDD ES ETH or SDD ES
PROFIBUS
}
System description "Safety Device Diagnostics"
For the use of passive junctions
}
Operating manual for a passive junction
You will need to be conversant with the information in these documents in order to fully un-
derstand this operating manual.
2.2.3

Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by persons who are competent to do so.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company's responsibility only to employ personnel who
}
Are familiar with the basic regulations concerning health and safety / accident prevention,
}
Have read and understood the information provided in the section entitled Safety
} Have a good knowledge of the generic and specialist standards applicable to the specific
application.
Operating Manual PSEN ml b 1.1/2.1/2.2
1003884-EN-12
| 9