Connection To Pilz Evaluation Devices - Pilz PSEN ml b 1.1 Operating Manual

Connection to control systems and evaluation devices
6.4

Connection to Pilz evaluation devices

The safety switch can be connected to Pilz evaluation devices.
Suitable Pilz evaluation devices are, for example:
}
PNOZmulti for safety gate monitoring
Configure the switch in the PNOZmulti Configurator with switch type 3.
}
PSSuniversal PLC for safety gate monitoring with function block FS_SafetyGate
The correct connection to the respective evaluation device is described in the operating
manual for the evaluation device. Make sure that the connection is made in accordance
with the specifications in the operating manual for the selected evaluation device.
Connection to PNOZmulti is illustrated by way of example.
Connection example with PNOZmulti and Safety Device Diagnostics
PNOZmulti
Operating Manual PSEN ml b 1.1/2.1/2.2
1003884-EN-12
A1
A2
O2 (FS)
O1 (FS)
I0
I1
Activation of guard locking via SDD ES module
Tx
Rx
PSEN ml
5 Y32
8 Y1
A1
2
A2
7
6 S31
1 S41
12
3
22
4
| 29