Safety; Intended Use; Safety Regulations; Additional Documents That Apply - Pilz SDD ES PROFIBUS Operating Manual

SDD ES PROFIBUS

Safety

Intended use

The SDD ES PROFIBUS is used for communication between connected safety devices and
the Profibus DP-V0. The Profibus DP-V0 is designed for data exchange at field level.
Application of the product SDD ES PROFIBUS:
}
Evaluate and display diagnostic data and status information from safety devices
}
Connect safety devices and Profibus DP-V0
}
Process and display data from the PROFIBUS
}
Transfer diagnostic data and status information from the safety devices to Profibus DP-
V0
Appropriate safety devices are listed in the document "System Description Safety Device
Diagnostics".
The SDD ES PROFIBUS may not be used for safety-related functions.
The following is deemed improper use in particular
} Any component, technical or electrical modification to the product,
}
Use of the product outside the areas described in this manual,
} Use of the product outside the technical details (see

Safety regulations

Additional documents that apply

Please read and take note of the following documents:
} Operating manual for the relevant Pilz safety device
}
Operating manual of a passive junction, for example:
– PSEN ix2 F4 code
– PSEN ix2 F8 code
– PDP67 F 4 code
– PSEN Y junction
} System description "Safety Device Diagnostics"
You will need to be conversant with the information in these documents in order to fully un-
derstand this operating manual.
Operating Manual SDD ES PROFIBUS
1003825-EN-06
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
Technical details [ 20]).
| 8