Installation
8.2.2
Installation on swing gate
Fig.: Swing gate with internal and external hinge
Legend
[1]
[2]
1. Install the safety switch with the
actuator [
2. Use two M5 screws to fix the actuator to the gate.
The actuator should engage smoothly into the safety switch.
Install the safety switch horizontally at a swing gate
Depending on the installation boundary conditions, a larger gate radius may be required
(see diagram).
Please contact Pilz when smaller gate radiuses are required.
Operating Manual PSEN ml b 1.1/2.1/2.2
1003884-EN-12
[2]
Safety switch on gate frame
Actuator, installed on swing gate
39]
or
side-on to actuator [
[1]
fixing screws of the safety switch in parallel to the
39]
on the gate frame.
[2]
| 33