Table of Contents
Advertisement
SDD ES PROFIBUS
Block diagram
Installation
}
The safety relay should be installed in a control cabinet with a protection type of at least
IP54.
}
Use the notch on the rear of the unit to attach it to a DIN rail (35 mm).
}
When installed vertically: Secure the unit by using a fixing element (e.g. retaining bracket
or end angle).
}
Push the device upwards or downwards before lifting it from the DIN rail.
Operating Manual SDD ES PROFIBUS
1003825-EN-06
NOTICE
Damage due to electrostatic discharge!
Electrostatic discharge can damage components. Ensure against discharge
before touching the product, e.g. by touching an earthed, conductive sur-
face or by wearing an earthed armband.
| 11
Advertisement
Table of Contents
