Adjusting The Basic Position Of The Shift Lever - Husqvarna TE 250i 2021 Owner's Manual

17 TUNING THE ENGINE
17.7
130

Adjusting the basic position of the shift lever

401950-12
401951-10
–
1
Remove screw with the washers and take off shift
2
lever .
–
A
Clean gear teeth of the shift lever and shift shaft.
–
Mount the shift lever on the shift shaft in the required position
and engage gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift procedure.
–
Mount and tighten screw
Guideline
Screw, shift M6
lever
1
with the washers.
14 Nm (10.3 lbf ft)
®
Loctite 243™