Preparing The Vehicle For Rides On Wet Sand - Husqvarna TE 250i 2021 Owner's Manual

8.6

Preparing the vehicle for rides on wet sand

–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint
value:
V00899-01
–
Change the radiator cap.
–
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for Husqvarna Motor-
cycles technical accessories.
M01106-01
–
Clean the chain.
–
Mount the steel sprocket.
–
Grease the chain.
Universal oil spray (
–
Clean the radiator fins.
–
Straighten the bent radiator fins carefully.
Condition
Regular use in sand
600868-01
–
Change the piston every 10 operating hours.
PREPARING FOR USE 8
1.8 bar (26 psi)
Warning
Danger of scalding During motorcycle
operation, the coolant gets very hot and is
under pressure.
–
Do not open the radiator, the radiator
hoses or other cooling system compo-
nents if the engine or the cooling system
are at operating temperature.
–
Allow the cooling system and the engine
to cool down before you open the radiator,
the radiator hoses or other components of
the cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
p. 160)
35