Starting Off; Shifting, Riding - Husqvarna TE 250i 2021 Owner's Manual

9.3

Starting off

Info
Switch on the light before riding the vehicle. You will be seen earlier by other motorists.
When you are riding, the side stand must be folded up and secured with the rubber strap.
–
Pull the clutch lever, shift into first gear, release the clutch lever slowly and at the same time open the throt-
tle carefully.
9.4

Shifting, riding

Warning
Danger of accidents If you change down at high engine speed, the rear wheel blocks and the engine
races.
–
Do not change into a low gear at high engine speed.
–
Take the motorcycle off side stand
stand with rubber strap
–
Shift the transmission into neutral.
(All EU models)
–
Turn the emergency OFF switch to the position
Condition
Ambient temperature: < 10 °C (< 50 °F)
–
Pull the cold start button out all the way and turn it by a ¼
turn.
401944-10
Info
If the engine is warm, the cold start button must
be deactivated.
–
Press the start button.
Info
Do not open the throttle.
Press the start button for a maximum of 5 seconds.
Wait for 30 seconds before a further attempt at start-
ing.
At temperatures below 15 °C (60 °F), several attempts
at starting may be necessary to warm-up the lithium-
ion battery and thereby increase the starting power.
400733-01
During the starting process, the malfunction indicator
lamp lights up.
RIDING INSTRUCTIONS 9
1
and secure the side
2
.
.
39