Husqvarna TE 250i 2021 Owner's Manual page 69

SERVICE WORK ON THE CHASSIS 12
–
Mount the chain.
–
Connect the chain with the connecting link.
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
F02306-10
(All EU models)
–
Join plug-in connector of the brake light switch.
H03698-10
–
Position the foot brake cylinder.
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
F02307-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
F02308-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the link fork slightly to be able to mount the
screw more easily.
3
engages in the foot brake cylinder.
4
.
M6 10 Nm (7.4 lbf ft)
5
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
6
.
M10 60 Nm (44.3 lbf ft)
®
Loctite 2701™
67