Husqvarna TE 250i 2021 Owner's Manual page 125

–
Pour coolant in up to measurement
fins.
Guideline
Coolant level
radiator fins
Coolant (
400243-10
–
Push protection cap
H03761-10
–
Unplug connector
–
Remove thermostat
escapes without bubbles.
–
Mount thermostat
Guideline
Screw, cylinder head
temperature sensor
–
Plug in connector
H03762-10
–
Position protection cap
–
Pour coolant in up to measurement
fins.
Guideline
Coolant level
radiator fins
Coolant (
400243-10
–
Mount radiator cap
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
H03763-10
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the coolant level. (
COOLING SYSTEM 16
A
above the radiator
10 mm (0.39 in)
A
above the
p. 157)
2
upward over the thermostat.
3
.
4
with O-ring and wait until the coolant
4
with the O-ring and tighten.
M10x1.25 12 Nm (8.9 lbf ft)
3
.
2
.
A
above the radiator
10 mm (0.39 in)
A
above the
p. 157)
5
.
p. 121)
123