Understanding the MTX-30P Push Terminal Front Panel
Front/Side Panel Features
The front panel of the MTX-30P Push terminal contains the following controls:
•
LED Indicator: During normal standby operation (power on), the Green LED will flash
once per second. When a user successfully verifies the Green LED will stay solid for
three seconds. If a user fails to verify, the Red LED will stay on for three seconds.
Note: If the proximity card reader does not follow the standard LED operational parameters,
please consult support.
•
Speaker: Provides audible voice verification of operations, i.e., "Thank you", "Incorrect
Password", "Access Denied", "Invalid Id", "Please try again", etc.
•
TFT Display Screen: Displays time, date, day, and operational information.
•
Proximity Card Senor: Proximity card must be presented approximately 1 inch in front
of the reader to punch.
•
Keypad: Used to input User ID, password, and perform menu operations.
•
USB Port: Insert USB to download software, copy over passwords, etc.
•
Reset Button: Clear all current settings and go back to all factory default settings.
Front View
Keypad
TFT Display Screen
MTX-30P Push Installation & Operation Guide
LED Indicator
Side View
Proximity Card
Sensor
Reset Button
USB Port
Speaker
Page 8
Need help?
Do you have a question about the MTX-30P PUSH and is the answer not in the manual?