Packing; Pipettor Design - Labnet BioPette Plus Instruction Manual

2. Packing

The pipettors are delivered with the following:
Description
Instruction manual
Quality Control certificate
Calibration key
Pipettor hanger
Identification labels
Lubricant (for single-channel pipettor)
Ejector cap (for pipettor models P3942-2,
P3942-10, P3942-5000, P3942-10000)
Filters (for pipettor models
P3942-5000, P3942-10000)
Filters
The 5,000 μL and 10,000 μL pipettors include a replaceable
filter, fitted at the bottom of the shaft which prevents
aspirated liquid from entering the shaft and contaminating
the inner surface and plunger. Use of the filter is particularly
important when aspirating and dispensing large volumes
of liquid. The filter should be replaced if it becomes wet.

3. Pipettor Design

Model Identification
The volume range of the pipettor is shown on the
pushbutton and on the tip ejector bar in multi-channel
pipettors.
2 – LABNET BIOPETTE PLUS PIPETTORS
Qty/Pk
1
1
1
1
1
1
1
3