9.2.10 Configuration
The CAN-USB adapter can be configurated with „Hard-
ware". Normally the configuration is set automatically. If
the baud rate of the controller should be changed, also
the mPLC settings have to be adapted. If the CAN-USB
adapter is attached, its status is indicated green.
Version 07.2020 | Page/ Seite 51
9.2.10 Konfiguration
Hier kann unter „Hardware" der CAN-USB-Adapter konfi-
guriert werden. Im Allgemeinen geschieht dieses automa-
tisch. Sollte jedoch die Baud_rate des Reglers geändert
werden, so muss sie auch für mPLC angepasst werden.
Ist der CAN-USB-Adapter angeschlossen, wird sein Status
mit grün angezeicht
www.dunkermotoren.com