Daily Inspection Procedures 23 to 24 Speci cations Standard Period of Use Takara Belmont would like to thank you for purchasing Disposing of this Product this Takara Belmont product. Be sure to read this operation manual before operating the chair and always operate the chair properly according to the instructions herein.
All these precautions describe important items related to safety. Be sure to always obey all the precautions contained in this manual. Takara Belmont has absolutely no responsibility for accidents that might be caused by failure to obey "Safety Precautions", "Notes for Use" and "Notes Related to Synthetic (Natural) Leather"...
Sudden operation of the chair can result in injury. Installation precautions • nstallation of this chair must be performed by specialized personnel (personnel from Takara Belmont or Takara Belmont speci ed representative). • he chair must be installed on a perfectly at and solid oor.
Page 4
Safety Precautions (Must be Obeyed) WARNING Do not use in an environment Precautions when getting in and where there are electromagnetic out of the chair interference waves. lways be sure to lower the chair to the lowest position and lock the rotation when a sing this chair in an environment where there customer is getting in or out of the chair in are electromagnetic interference waves can...
Page 5
Safety Precautions (Must be Obeyed) WARNING Precautions during chair rotation e sure to always lock (secure) chair rotation by using the rotation lock switch after rotating the chair. Be especially careful of customer when the backrest is reclined. Check that the safety of the customer is ensured before rotating the chair.
Page 6
Always operate off the power and unplug the power plug, and the power switch by your hands only. contact your closest dealer or Takara Belmont. Be extremely careful not to mistake Do not place any objects on top of the switches when operating.
Page 7
Safety Precautions (Must be Obeyed) CAUTION Precautions when using the cape holder • o not apply excessive force to the cape holder as it can only withstand a load of 10 N (1 kgf/2.2 lbf). • e sure to always return it to the stored state when not in use. •...
NOTE Please contact your closest dealer or Takara Belmont if the breaker function (P.22) frequently operates. The maximum load of this chair is 1,350 N (135 kgf/298 lbf). ...
Locations of Warning Labels Notes Related to Synthetic (Natural) Leather lothing dye adhering he color of clothing or belts can be transferred to the synthetic leather of this chair by means of contact. If color adheres to the leather, wipe off the stain as soon as possible by using a soft cloth that has been dabbed with a neutral detergent diluted with water to approximately 10% in order to prevent the stain from soaking in due to the plasticizer.
Accessories • Operation manual (this manual) • Installation manual • Flange nut (M6) 3 pcs. • Rubber ring • Step (with adjuster) Name of Components ■Main Unit Headrest (with headrest cover) Backrest Armrest Child seat Emergency rise switch Cape holder Seat Control panel cover Step post...
Page 11
Name of Components ■Operating Section Control Panel (right) Right (1) Rotation lock switch (2) Backrest switch (3) UP/DOWN switch (4) Preset switch P1 These are collectively referred to as the "Control Panel". (5) Preset switch P2 (6) Auto-return switch (7) Child seat Up switch (8) Child seat Down switch Foot Control Power switch (Breaker)
Preparation ■Power Supply 1. Insert the power plug into the outlet. • e sure to use a 120-V AC (7 A or more)* outlet for the power supply. Do not share use of the outlet with any other electrical device. Power plug •...
How to Use (1) Guiding Customers 1. Rotate the chair so that the customer can be easily seated on the chair. 1 Release the base rotation with the rotation lock <Control Panel> switch. Pressing the rotation lock switch on the control panel releases Rotation lock switch the base rotation.
Page 14
How to Use 2. Using the cape holder Using the cape holder: Provides space between the customer and the cutting cape to provide good ventilation. Makes it easy to clean up the cut off hair. 1 Pull the cape holder located at the edge of the armrest outward, and rotate it forward. Pull out the cape holder outward by holding around the axis of the cape holder.
How to Use (2) Raising/Lowering the Chair 1. Raising the chair To raise the chair, step on the right side of the UP/DOWN foot switch at the foot control or press the UP/DOWN switch of the control panel upwards. The chair is raised while stepping on (pressing) the switch. ⇒If the chair rotation lock is released, the chair rotation gets locked automatically when you press the switch.
How to Use (3) Reclining/Raising the Backrest 1. Pull out the headrest. Use the headrest when supporting the customer's head is needed, such as for shaving. Do not use the headrest if it is not needed, such as for back shampooing. 1 Put your hand in between the headrest and backrest to pull up the headrest.
Page 17
How to Use 2. Reclining the backrest Push the backrest switch of the control panel in the direction of the arrow as shown in the below-left gure to recline the backrest. Push the switch toward the back of the chair. The backrest reclines while the switch is pressed. ⇒If the chair rotation lock is released, the chair rotation gets locked automatically when you press the switch.
How to Use (4) Using the Child Seat Function This chair is equipped with a child seat that is able to be individually raised and lowered. 1. Raising the child seat Press the child seat Up switch on the armrest control panel. The child seat will rise up while it is being pressed.
Page 19
How to Use <Emergency Rise Function> If an object or a body part such as a hand or leg is pinched between the child seat and the seat (shaded section of the following diagram) during child seat lowering, this function slightly raises the child seat and halts operation. When the system detects that an object or a body part has become pinched in the shaded area in the diagram, the child seat down switch is disabled.
How to Use (5) Using Preset Functions 1. Using the preset function A press of the preset switch moves the chair to the preset position. Two preset positions are available for this chair. 1 Pull the headrest out to the desired position previously if you need to use it. 2 Press the preset switch on the control panel once.
Page 21
How to Use 2. Using the auto-return function Press the auto-return switch on the control panel once. The chair height and backrest angle return to their initial position for getting in/out of chair. (An electronic "pough" sound is emitted to notify you that operation is starting.) ⇒If the chair rotation lock is released, the chair rotation gets locked automatically when you press the switch.
Care and Maintenance Clean this chair after use to maintain it in a clean state. Leaving dirt or grime on the chair can result in the formation of mold. Always be sure to unplug the power plug from the outlet when cleaning the chair. ■Cleaning of Each Part Leather Parts Plastic Parts...
Daily Inspection Perform inspection according to the "Daily Inspection Procedures" indicated on pages 23 and 24 of this operation manual in order to ensure safe use of this chair. Perform daily inspection according to the "Daily Inspection Procedures". Using the chair without performing daily inspection can result in malfunction or accident.
If any of the problems described above are inspected and the chair does not work normally even after performing the recovery procedures, immediately stop using the chair, turn off the power, unplug the power plug, and contact your closest dealer or Takara Belmont. Daily Inspection Procedures Perform the following inspection procedures in order to ensure that the chair can be used safely.
Page 25
Stop using the chair, turn off the power, unplug the power plug, and contact your closest dealer or Takara Belmont to inform of the abnormal situation. □Check that no oil is □Check that no oil has dripped □Oil might be leaking from hydraulic parts.
Speci cations Model No. AB-HPEXN Weight 114 kg/252 lb Max. load 1,350 N (135 kgf/298 lbf) (When child seat in use: 500 N (50 kgf/110 lbf)) Operating noise volume 70 dB or less Rated voltage 240 V AC 230 V AC 220 V AC 120 V AC 110 V AC...
(including parts replacement). This is not a warranty period. The length of the "standard period" differs depending on the use environment and frequency of use of the customer. For maintenance after the standard period of use, contact your closest dealer or Takara Belmont. Disposing of this Product...
Page 28
TAKARA BELMONT CORPORATION 1-1, Higashi-shinsaibashi 2-Chome,Chuo-ku,Osaka,Japan TEL:(06)6213-5945 FAX:(06)6212-3680 1E04LEA0 Printed in Japan 1504 Original instruction...