Table of Contents
Advertisement
Quick Links
TAKARA BELMONT Barber Chair
Legacy 91 Barber Chair
Legacy 92 Barber Chair
AB-0091 AB-0092
Model No.
Operating Manual
Thank you for purchasing TAKARA BELMONT product.
Please read through this manual
carefully before installing or using
the product to ensure correct use.
Failure to read the operating manual may lead to
accidents.
This product is designed for commercial use at barbers
or beauty salons and should be used in combination
with an upper seat unit. Do not use this product for the
purposes other than the practices and services in these
places.
Keep this operation manual in a safe place for your
future reference.
Please contact us in case your operation manual is
unreadable such as being soiled or ripped, or is lost.
Table of Contents
Adjusting the Headrest............................6
For back shampoo and haircut ..............7
Using the Heelrest (AB-0091) ............... 7
Reclining/Raising the Backrest .............8
Using the Cape Holder ............................9
Using the Dryer Holder ..........................10
Using the Manicure Holder....................10
1 - 2
2 - 3
4
4 - 5
11
12
13 - 14
15
Advertisement
Table of Contents
Related Manuals for Takara Belmont Legacy 91
Summary of Contents for Takara Belmont Legacy 91
-
Page 1: Table Of Contents
Daily Inspection Procedure 12 Specifications 13 - 14 Standard Period of Use Thank you for purchasing TAKARA BELMONT product. Please read through this manual When Disposing of This Product 15 carefully before installing or using the product to ensure correct use. -
Page 3: Safety Precautions (Be Sure To Observe The Instructions)
Please follow all of the precautions shown here, as they contain important information related to safety. TAKARA BELMONT bears no responsibility for harm and damage caused to the user or third parties in the event that the “Safety Precautions”, “Notes for Use” or the “Notes for Use with Synthetic Leather”... -
Page 4: Notes For Use
The headrest can withstand a load of 100N (10 kgf/22 lbf). Be careful during installation · Have installation or mounting of the equipment performed by a professional (from TAKARA BELMONT or a TAKARA BELMONT specified representative). - Page 5 Notes for Use Caution Do NOT put things other than people on the seat Putting things other than people may cause deformation, tearing, or corrosion of the upholstery. Do NOT clean using chemicals or apply heat If any chemicals are splashed on the upholstery parts, wipe off the chemical immediately. Splashed chemicals may cause discoloration or deterioration.
-
Page 6: Notes For Use With Upholstery
Notes for Use with Upholstery Adherence of fabric dyes The upholstery may be stained by coming into contact with fabric, belts or other such attire. In order to avoid infiltration by plasticizer when color has been adhered, apply a solution of neutral detergent diluted by about 10% to a soft towel and wipe off the color as soon as possible. -
Page 7: Name Of Components
Name of Components (Including Options) Cape Holder Headrest button Dryer holder Hook Component Materials The casting components of this chair are a handmade one-off product. Different from mass-produced products, the casting components used for appearance of this product are made by hand piece by piece. Some convexoconcave and a hole may remain in the casting surface. -
Page 8: How To Use
How to Use Adjusting the Headrest Inserting the Headrest Note: The headrest is unnecessary for back shampoo and haircut. Insert the headrest while pressing the headrest button. You cannot insert the headrest unless you depress the headrest button. Headrest button Adjust the headrest to the height of the customer’s head. -
Page 9: For Back Shampoo And Haircut
How to Use For back shampoo and haircut For back shampoo, pull out the headrest completely. Insert the pulled-out headrest into the headrest holder on the side of the body. Headrest Headrest holder When pulling out the headrest, be sure to ensure that metal fittings of the CAUTION headrest do not hit the customer’s head. -
Page 10: Reclining/Raising The Backrest
How to Use Reclining/Raising the Backrest The backrest can be unlocked by the reclining lever. The backrest moves only when the reclining lever is tilted back. · When reclining the backrest Backrest Tilt the reclining lever back. The reclining lever is retained by Reclining lever the gas pressure of the gas cylinder so let the customer lean... -
Page 11: Using The Cape Holder
How to Use Using the Cape Holder Using the cape holder provides the following: · Good ventilation (making space between the customer and cutting cape) · Easy handling of cut hair 1 Rotate the cape holder at the tip of the armrest forward. Cape holder When storing When using... -
Page 12: Using The Dryer Holder
How to Use Using the Dryer Holder The dryer holder is equipped in the rear of the left body. Use the dryer holder as the temporary holder of a hand dryer during operation. Lay the ring of the dryer holder when you use the holder. Body Ring Dryer holder... -
Page 13: Care And Maintenance
Care and Maintenance Take care of the product after use and keep it always clean. If dirt is allowed to remain, mold may be generated. Maintenance of each section Upholstery Resin Wipe the upholstery with soft and dry cloth. Wipe the resin with soft and dry cloth. If the dirt is heavy If the dirt is heavy By using a soft cloth dampened with neutral... -
Page 14: Daily Inspection
If the operation is abnormal, reclining lever. contact your local dealer or TAKARA BELMONT. Inspect that the equipment does If the equipment wobbles or abnormal sound not wobble and abnormal sound occurs during operation, contact your local does not occur during operation. -
Page 15: Specifications
Specifications Model No. AB-0091 Maximum 1350N (135 kgf/298 lbf) load Backrest withstand load, legrest withstand load: 600N (60 kgf/132 lbf) Headrest withstand load: 100N (10 kgf/22 lbf) 68.5 kg Mass Provided Heelrest Usage environment Temperature 0 〜 40ºC Humidity 10 〜 95% Air pressure 700 〜... - Page 16 Specifications Model No. AB-0092 Maximum 1350N (135 kgf/298 lbf) load Backrest withstand load, legrest withstand load: 600N (60 kgf/132 lbf) Headrest withstand load: 100N (10 kgf/22 lbf) 66.5 kg Mass Not provided Healrest Usage environment Temperature 0 〜 40ºC Humidity 10 〜 95% Air pressure 700 〜...
-
Page 17: Standard Period Of Use
This is not a warranty period. The “standard period of use” will differ depending on the environment that the customer uses the product in and its frequency of use. For maintenance after the standard period of use has passed, consult your local dealer or TAKARA BELMONT. When Disposing of This Product Properly dispose of this product or its replacement parts in accordance with the rules and regula- tions at the time of disposal. - Page 18 M E M O...
- Page 19 M E M O...
- Page 20 NOTE TAKARA BELMONT CORPORATION 2-1-1, Higashishinsaibashi, Chuo-ku, Osaka, 542-0083, Japan TEL:81-6-6213-3523 FAX:81-6-6211-5745 Printed in Japan 1710 BOOK.No : 1E04TUCE Original instruction...