Eu Declaration Of Incorporation - Aerotech ANT130R Hardware Manual

ANT130R Hardware Manual

EU Declaration of Incorporation

Manufacturer:
herewit h declares t hat t he product :
ANT130R Stage
is intended to be incorporated into machinery to constitute machinery covered by the
Directive 2006/42/EC as amended;
and that the following harmonized European standards have been applied:
EN ISO 12100:2010
Safety of m achiner y - Basic concepts, gener al pr inciples for design
EN 60204-1:2010
Safety of m achiner y - Electr ical equipm ent of m achines - Par t
1: Gener al r equir em ents
and further more declares that
it is not allowed to put the equipment into service until the machinery into
which it is to be incorporated or of which it is to be a component has
been found and declared to be in conformity with the provisions of the
Directive 2006/42/EC and with national implementing legislation, for
example, as a whole, including the equipment referred to in this
Declaration.
This is to certify that the aforementioned product is in accordance with the applicable requirements of the
following Directive(s):
EU 2015/863
Authorized Representative:
Address:
Name
Position
Location
Date
www.aer otech.com
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
USA
Directive, Restricted Substances (RoHS 3)
Simon Smith, European Director
Aerotech Ltd
The Old Brick Kiln, Ramsdell, Tadley
Hampshire RG26 5PR
UK
/ Alex Weibel
Engineer Verifying Compliance
Pittsburgh, PA
4/12/2021
Declaration of Conformity
7