Figure 2-4: Load Orientations; Figure 2-5: Cantilevered Load Capabilities - Aerotech ANT130R Hardware Manual

Mechanical Specifications and Installation
Applied loads should be symmetrically distributed whenever possible (i.e., the payload should be
centered on the stage table and the entire stage should be centered on the support structure).
If cantilevered loads are applied, refer to
find the maximum allowable load.
18
Figure 2-4 to find the loading condition. Refer to
Figure 2-4: Load Orient at ions
Figure 2-5: Cant ilevered Load Capabilit ies
Chapter 2
ANT130R Hardware Manual
www.aer otech.com
Figure 2-5 to