Regulations Covering Fireplace Installation; Fireplace Installation; Standoff Installation; Transportation Packaging - HearthStone WFP-100 Owner's Manual

Table of Contents

6.2 REGULATIONS COVERING FIREPLACE INSTALLATION

When installed and operated as described in these instructions, the WFP-100 wood fireplace is suitable for

use in residential installations.

In Canada, the CSA B365 Installation Code for Solid Fuel Burning Appliances and Equipment and the CSA

C22.1 Canadian National Electrical Code are to be followed in the absence of local code requirements. In

the USA, the ANSI NFPA 211 Standard for Chimneys, Fireplaces, Vents and Solid Fuel-Burning Appliances

and the ANSI NFPA 70 National Electrical Code are to be followed in the absence of local code

requirements.

THE FIREPLACE IS NOT APPROVED FOR USE WITH A SO-CALLED "POSITIVE FLUE CONNECTION"

TO THE CLAY TILE OF A MASONRY CHIMNEY.

BEFORE INSTALLING YOUR FIREPLACE, YOU MUST INSTALL THE TWO STANDOFFS ON THE

SIDE AND THE TWO STANDOFFS ON THE BACK OF THE FIREPLACE.

The standoffs are in the firebox of the fireplace and the screws are with the manual kit. Using the screws

provided, install two standoffs on each side and two standoffs on the back of the fireplace.

Side standoffs

To facilitate transportation of the WFP-100 fireplace before installation, we have designed a transportation

packaging that allows reducing the weight. The fireplace refractory panels are in a box you can carry

separately. We suggest you install the refractory panels after the setting up of the fireplace. To install the

refractory panels, see

The best location to install your fireplace is determined by considering the location of windows, doors, and

the traffic flow in the room where the fireplace is located, allowing space in front of the unit for the heart

extension and the mantel, and taking into consideration the location of the hot air ducts (optional), outside

air kit and chimney. If possible, choose a location where the vent will not interfere with any truss, roof

HearthStone Quality Home Heating Products, Inc ®

NOTE

Back standoffs

WFP-100 Model 8420

Table of Contents

8420