Table of Contents
Advertisement
Refer to the building code or the local code for regulations concerning the need to install finishing material
inside the chase around the fireplace.
6.3.8 FACING
Materials directly in the front of the fireplace, must be
shown on the following figure.
Non-combustible materials such as brick, stone or ceramic tile may project in front of and onto the fireplace
decorative frame.
MATERIALS MUST BE INSTALLED SO THAT THE FACEPLATE MAY BE REMOVED AFTER THE
INSTALLATION. THE FACEPLATE IS DESIGNED TO OVERLAP THE MATERIAL SURROUNDING THE
FIREPLACE. IF THE MATERIAL IS THICKER, USE A FACEPLATE GAUGE FOR POSITIONING AND
MAKE SURE THAT THE FACEPLATE CAN BE REMOVED AFTER IT HAS BEEN INSTALLED.
6.3.9 INSTALLATION OF A NON COMBUSTIBLE SHELF
It is possible to install a shelf but it must be made of non combustible materials. It must be installed at,
at least, 52" from the base of the fireplace.
THE SHELF WILL BE HOT. DO NOT PUT COMBUSTIBLE MATERIALS ON THE SHELF.
HearthStone Quality Home Heating Products, Inc ®
non-combustible and have the
CAUTION
O
P
Q
R
WARNING
37
minimum dimensions
MEASUREMENTS
84" (2134mm)
50 3/4" (1289mm)
3 1/16" (78 mm)
3" (76 mm)
LEGEND
Combustible material
allowed in this area
Non-combustible
material only in this
area
WFP-100 Model 8420
Advertisement
Table of Contents
