Led Indications; Accessories - Gallagher T11 Mifare Reader Black Installation Note

7. Removal of the facia assembly is a simple reversal of these steps.
8. Configure the reader in Command Centre. If the reader is connected as an HBUS Reader, refer to
the topic "Configuring HBUS Devices" in the Command Centre Configuration Client Online Help.
If the reader is connected as a Cardax IV Reader, refer to the topic "Creating Readers" in the
Command Centre Configuration Client Online Help.
5 LED indications
LED (squiggle)
3 Flash (Amber)
2 Flash (Amber)
1 Flash (Amber)
On (Green or Red)
Flashes Green
Flashes Red
Flashes (Blue)
LED (squiggle)
3 Flash (Amber)
On (Green or Red)
Flashes Green
Flashes Red
6

Accessories

Accessory
T11 Dress Plate, Black, Pk 10
T11 Bezel, Black, Pk 10
T11 Bezel, White, Pk 10
T11 Bezel, Silver, Pk 10
T11 Bezel, Gold, Pk 10
T11 Spacer, Black, Pk 10
T11 Spacer, White, Pk 10
T11/T12 Protective Cover Spacer
T11/T12 Protective Cover
3E4289 Gallagher T11 Reader | Edition 1 | August 2016
Copyright © Gallagher Group Limited
HBUS indication
No communications with the Controller.
Communications with the Controller, but reader is not configured.
Configured to a Controller, but reader is not assigned to a door or elevator car.
Fully configured and functioning normally.
Green = Access mode is Free
Red = Access mode is Secure
Access has been granted.
Access has been denied.
Reading and validating a PIV card. Reading a Gallagher mobile credential.
Cardax IV indication
No communications with the Controller.
Fully configured and functioning normally.
Green = Access mode is Free
Red = Access mode is Secure
Access has been granted.
Access has been denied.
Product Code
C300321
C300284
C300285
C300286
C300287
C300302
C300303
C300311
C300271
Page 10