Led Indications; Accessories - Gallagher T15 Mifare Reader Black Installation Note

7. Removal of the facia assembly is a simple reversal of these steps.
8. Configure the reader in Command Centre. If the reader is connected as an HBUS Reader, refer to
the topic "Configuring HBUS Devices" in the Command Centre Configuration Client Online Help.
If the reader is connected as a Cardax IV Reader, refer to the topic "Creating Readers" in the
Command Centre Configuration Client Online Help.
5 LED indications
LED (squiggle)
3 Flash (Amber)
2 Flash (Amber)
1 Flash (Amber)
On (Green or Red)
Flashes Green
Flashes Red
Flashes (Blue)
LED (squiggle)
3 Flash (Amber)
On (Green or Red)
Flashes Green
Flashes Red
6

Accessories

Accessory
T15 Bezel, Black, Pk 10
T15 Bezel, White, Pk 10
T15 Bezel, Silver, Pk 10
T15 Bezel, Gold, Pk 10
T10 Dress Plate, Black, Pk 10
T10 Spacer, Black, Pk 10
T10 Spacer, White, Pk 10
T10 Protective Cover Spacer
3E4237 Gallagher T15 Reader | Edition 1 | June 2016
Copyright © Gallagher Group Limited
HBUS indication
No communications with the Controller.
Communications with the Controller, but reader is not configured.
Configured to a Controller, but reader is not assigned to a door or elevator car.
Fully configured and functioning normally.
Green = Access mode is Free
Red = Access mode is Secure
Access has been granted.
Access has been denied.
Reading and validating a PIV card.
Cardax IV indication
No communications with the Controller.
Fully configured and functioning normally.
Green = Access mode is Free
Red = Access mode is Secure
Access has been granted.
Access has been denied.
Product code
C300320
C300300
C300301
C300310
Page 10