Figure 4-5: Cross-Section View Of Rear Seal Showing Seal Orientations - Aerotech ACS100 Hardware Manual

ACS Hardware Manual
9. Lubricate the sealing surfaces and carefully press the rear seal housing back onto the stage base. Use
care when replacing the rear seal housing as the seals can be easily damaged.
10. Replace the rear seal housing retaining screws to a torque of 1.8 to 2.0 N·m (16 to 18 in-lbs).
11. Replace the airline and reconnect power.
Figure 4-5:
www.aerotech.com
4.3.2. Rotary Union Seals for Three-Jaw Gripper Stages
Cross-section View of Rear Seal Showing Seal Orientations
55