Table 3-5: Feedback Pinouts; Table 3-6: Mating Connector Part Numbers For The Feedback Connector - Aerotech ACS100 Hardware Manual

ACS Hardware Manual
Table 3-5: Feedback Pinouts
Pin Description
Case Shield
1 Reserved
2 Over-Temperature Thermistor sensor
3 +5 V power supply
4 Reserved
5 Hall Effect sensor, phase B
6 Marker-N
7 Marker
8 Reserved
9 Reserved
10 Hall Effect sensor, phase A
11 Hall Effect sensor, phase C
12 Reserved
13 Reserved
14 Cosine
15 Cosine-N
16 +5 V power supply
17 Sine
18 Sine-N
19 Reserved
20 Common ground
21 Common ground
22 Reserved
23 Encoder Fault (Reserved on ACS100)
24 Reserved
25 Reserved
Table 3-6: Mating Connector Part Numbers for the Feedback Connector
Mating Connector
Backshell
Connector
www.aerotech.com
3.1. Motor and Feedback Connectors
Aerotech P/N
ECK00656
ECK00300
Connector
Third Party P/N
Amphenol #17E-1726-2
FCI DB25S064TLF
35