Tools Required; Safety Information - Agilent Technologies 6850 GC Install Manual

Tools required

Safety information

WA R N I N G
Installing Sampling Valves
Installing Sampling Valves on an Agilent 6850 Gas Chromatograph
• Torx T- 10 driver
• Torx T- 20 driver
• Open- end wrenches
• Inlet wrench (for capillary inlet)
Before continuing, read the safety information on your
Agilent 6850 Gas Chromatograph User Information
CD- ROM.
Before proceeding, turn off the oven and any heated zones and let
them cool down. Turn off all gases at their source, then turn off the
main power switch and unplug the power cord.
5