STIEBEL ELTRON HSBC 300 cool Operation And Installation page 9

INSTALLATIoN
Preparation
9.2.3 Separating / joining the appliance sections
Separating the appliance sections
Material losses
Unscrewing the fastening screws destroys the threads in
the insulation segment.
f To open the 3 fixing tabs, loosen the fastening f
screws slightly but do not unscrew them completely.
Note
To make removal simpler, the insulation segments have
labelled recessed grips on the left and right.
f Remove insulation segment 1. f
f Remove insulation segment 2. f
www.stiebel-eltron.com
f Pull the "heating sensor" out of the buffer cylinder. f
f Release the sensor lead from the guide groove. f
f Disconnect the push-fit connectors of the 4 hydraulic con- f
nections. To do this, pull the spring clips fully out with a
screwdriver.
f Pull the hydraulic connectors as indicated. f
HSBC 300 cool | HSBC 300 L cool | 43