INSTALLATIoN
electrical connection
11.4.1 Temperature sensor for cooling (accessory), if required
Cooling requires the fitting of a temperature sensor, available as
an accessory.
f Remove the front casing (see chapter "Preparations / Trans-
f
port and handling / Removing / fitting the front casing").
f Insert the temperature sensor into the sensor well "Sensor
f
heat pump cooling, optional".
f Lay the sensor lead in the guide groove provided for this pur-
f
pose in the insulation segment.
f Connect the temperature sensor to T(KUE) of terminal XD04
f
of the appliance.
www.stiebel-eltron.com
HSBC 300 cool | HSBC 300 L cool |
57